JM 1ST APPROACH

Photography

       :  

Passport Photos, Photo IDs, Portraits, Album Stored Pictures

Artworks

       :  

Designs, Mock-ups, Proofs

Promotional Material

       :  

Posters, Brochures, Catalogues, POPs

Custom Applications

       :  

Invitation Cards, Greeting Cards, Bookmarks, Menus
and lots more...!

Microporous inkjet coating for sharp, photo-realistic prints.

High gloss white surface for wide colour gamut and deep rich colours.

Thicker base for longer durability.

Instant dry & water-resistant properties for ease of handling, especially in tropical conditions.

Compatible with most colour inkjet printers.

Base

  :  

Paper

Thickness

  :  

254 gsm

Surface Finish

  :  

White Gloss

Printing Side

  :  

The glossy, whiter side

Shelf-life

  :  

Two years from the date of manufacture when stored in original packing at 20-25^O C and 50%rH.

Availability

  :  

A4 (210 mm x 297 mm);

Packing

  :  

25 sheets pack

Printer

Media Setting

Print Quality

Canon

Glossy Photo Paper

High

Epson Stylus Photo

Premium Glossy Photo Paper

Best Photo

HP Photosmart

HP Premium Plus Photo Paper

Best

Lexmark

Glossy / Photo Paper

Automatic

Hold the media by the edges. Be careful not to scuff or scratch the printing side.

Store the paper in a cool dry place and away from direct sunlight : 20-25^oC at 50% relative humidity.

Ensure that blank media is always kept safely in the original packing.

Store the media flat, to avoid curling or warping.

Step 1 

If there are more then one printer drivers installed on your system, select the printer you choose to print from. Click on "Properties" or "Preferences"

Step 2 

Select the "Paper / Media Type" depending on the type of media you wish to print on. This helps the printer to understand the quality of the media (i.e. paper, film, etc) that you are going to print on. As a reference you can refer to the "Recommended Printer Settings" section in this Product Information Capsule.

Step 3 

Now select the "Print Quality / Mode". Depending on the inkjet printer you are using and the media type you have already selected (step 2 ), select the Print quality / mode available in your printer. As a reference you can refer to the "Recommended Printer Settings" section in this Product Information Capsule.

Step 4 

Start printing your job.

The durability of the printed media is dependent on the fading characteristics of the inks used. Please consult the ink manufacturer for technical advice.

Stack your printouts with plain paper between the prints.

If you wish to laminate your print, a cold lamination process is recommended; in which case the print should be dried for a minimum of four hours. Ensure compatibility of the lamination film, prior to use.